Process Engineering · Process Safety · Resource Recovery

Engineering clarity.
Delivering better plants.

Independent process consultancy across the full plant lifecycle – concept, feasibility, FEED, detailed engineering, commissioning, optimisation and revamp – for refining, gas, petrochemical, chemical and environmental facilities.

ABCO is now ALEF. Same team, same commitment – ALEF Process Solutions FZE.

Refining & distillation Storage & terminals Recovery & treatment
Who we are

Process expertise, from concept to start-up – and beyond

A Sharjah-based process engineering consultancy supporting owners, investors, EPC contractors and operators across oil and gas, refining, petrochemicals, chemicals, utilities and resource recovery.

We turn process requirements into practical, defensible engineering packages that help clients make informed investment decisions, secure approvals, build safely and operate efficiently.
Distillation columns at a process facility
20+years of leadership experience in process engineering
15+refining, chemical and waste-recovery facilities supported
10countries across projects and leadership assignments
8lifecycle stages covered, concept to end of life

Who we work with

Plant owners & operators

Studies, revamps, troubleshooting and compliance.

Investors & developers

Feasibility, technology selection and due diligence.

EPC contractors

Process design services and specialist studies.

Technology vendors

Process packages and performance verification.

Waste operators

Recovery and treatment process design.

Authorities

Technical submissions and BAT documentation.

Why Alef

01

Independent

Technology-neutral advice based on the best fit for feed, product, site and budget.

02

Senior-led

Chartered, PhD-qualified leadership directly involved in every assignment.

03

Operator mindset

Designs that are safe to start up, simple to run and easy to maintain.

04

Regional insight

Hands-on knowledge of UAE and GCC authorities, climate and supply chains.

Project lifecycle

Process engineering at every stage of the asset life

One consistent technical basis – from the first idea to the operating plant. Engage us for a single study or across the complete project.

DEFINE
ENGINEER
DELIVER
OPERATE & IMPROVE
1

Concept & screening

  • Opportunity framing
  • Feed & product review
  • Block flow options
  • Order-of-magnitude cost
2

Feasibility & pre-FEED

  • Techno-economics
  • Technology / licensor selection
  • Capacity & configuration
  • Site and plot input
3

Basic engineering / FEED

  • Design basis & simulation
  • PFDs, H&MB, P&IDs
  • Equipment datasheets
  • HAZOP, SIL, relief
4

Detailed engineering

  • Final datasheets
  • Line sizing & hydraulics
  • Cause & effect, trips
  • Vendor document review
5

Procurement

  • Specifications & RFQs
  • Technical bid evaluation
  • Package unit review
  • FAT support
6

Construction & commissioning

  • Pre-commissioning checks
  • Commissioning procedures
  • Start-up on site
  • Performance tests
7

Operations & optimisation

  • Troubleshooting & RCA
  • Energy & yield gains
  • Debottlenecking & revamp
  • Training & SOPs
8

Life extension & end of life

  • Re-rating & change of service
  • Management of change
  • Decommissioning philosophy
  • Residue handling

Key deliverables by stage

StageTypical process deliverables
Concept / feasibilityBlock flow diagrams, option screening, preliminary mass balances, utility estimates, CAPEX/OPEX estimates (±30–50%), feasibility report
FEED / basic engineeringDesign basis, simulation, PFDs, heat & material balances, P&IDs, equipment and instrument process datasheets, utility and effluent summaries, process description, control and operating philosophy, preliminary relief and flare loads
Detailed engineeringFinal datasheets, line list and hydraulics, PSV sizing, flare network analysis, cause & effect charts, alarm and trip schedule, HAZOP close-out, vendor document review
Commissioning / operationsCommissioning and start-up procedures, operating manuals, SOPs, performance test reports, troubleshooting and optimisation studies
Core process engineering

Process design and equipment engineering

From the first simulation to the final datasheet – delivered against nominated codes, standards and client specifications.

Process design & simulation

  • Steady-state simulation and thermodynamic model selection
  • Heat & material balances – design, normal and turndown
  • PFD and P&ID development
  • Design basis, criteria and process descriptions
  • Dynamic simulation support for transients
  • Crude assay and petroleum fraction characterisation

Separation & mass transfer

  • Distillation, stripping and absorption column design
  • Tray and packing selection, rating and hydraulics
  • Vacuum, short-path and wiped-film evaporation
  • Liquid–liquid extraction and solvent recovery
  • Two- and three-phase separator sizing
  • Filtration, centrifugation and solids handling

Heat transfer & equipment

  • Shell-and-tube, plate and air-cooled exchangers
  • Fired heater and reboiler specification
  • Reactor sizing and performance evaluation
  • Vessels, drums and storage tank process design
  • Pumps, compressors, blowers and ejectors
  • Check-rating of existing equipment

Hydraulics & fluid systems

  • Line sizing, single- and two-phase pressure drop
  • Pump hydraulics, NPSH and system curves
  • Network and transfer system analysis
  • Surge and water-hammer screening
  • Control valve and restriction orifice sizing
  • Loading, unloading and tank transfer

Utilities & offsites

  • Steam, condensate and boiler feed water
  • Cooling water, chilled water, refrigeration
  • Instrument air, plant air, nitrogen, fuel gas
  • Hot-oil and thermal fluid systems
  • Tank farms, blending, vapour recovery
  • Firewater demand and drainage inputs

Control & automation inputs

  • Control and operating philosophies
  • Control narratives and loop strategy
  • Cause & effect and interlock logic
  • Alarm and trip schedules, set-point rationale
  • Instrument process datasheets
  • Inputs to DCS, ESD and APC
CODES & STANDARDSAPIASMETEMAIEC 61511NFPAISOClient & local authority requirements
Safety, performance & advisory

Safe, efficient and well-informed plants

Specialist studies that protect people and assets, reduce energy and emissions, and give decision-makers a clear technical view.

Process safety & risk

  • HAZID, HAZOP and What-If studies
  • LOPA, SIL determination and verification inputs
  • Relief load calculations and PSV sizing
  • Flare, blowdown and depressurisation studies
  • Consequence modelling inputs
  • PSM, MOC and PSSR support

Energy, emissions & optimisation

  • Pinch analysis and heat-exchanger networks
  • Energy audits and utility optimisation
  • Flare reduction and gas recovery
  • Emissions inventory and decarbonisation
  • Yield, product quality and cut-point gains
  • Heat integration for revamps

Revamp & debottlenecking

  • Test runs and performance baseline
  • Bottleneck identification and check-rating
  • Revamp options with cost and shutdown impact
  • Feed flexibility and change of service
  • Brownfield tie-ins and interfaces

Technical advisory & economics

  • Techno-economic feasibility and business cases
  • Technology and licensor evaluation
  • CAPEX / OPEX, payback and NPV inputs
  • Technical due diligence for investors and lenders
  • Owner's engineer and design review

Commissioning & operations

  • Commissioning and start-up procedures
  • On-site start-up and shutdown support
  • Performance and guarantee test runs
  • Troubleshooting and root cause analysis
  • Operating manuals, SOPs and training

Approvals & project support

  • Authority and free-zone technical reports
  • Environmental, emissions and BAT documents
  • Vendor and package-unit reviews
  • Technical bid evaluation
  • Site engineering and interface management
Refinery process area
Relief & flare systems
Skid-mounted package unit
Package units
Process piping and pipe racks
Revamps & optimisation

Illustrative process facility imagery

Process technologies

Practical solutions for complex plants

Experience spans separation, conversion, recovery, storage and treatment – with attention to operability, product quality, energy use and environmental performance.

Crude & petroleum distillation

Atmospheric and vacuum distillation, crude topping, batch and continuous units, cut-point control, product recovery, revamps.

Hydroprocessing & treating

Diesel and naphtha hydrotreating, sweetening and caustic treating, product finishing and stabilisation.

Refinery conversion & catalysis

Alkylation and catalyst systems, reactor evaluation, refinery off-gas utilisation.

Gas processing

Gas conditioning, glycol dehydration and regeneration, fuel gas and flare gas recovery systems.

Petrochemicals

Nitrobenzene, aniline and related aromatic derivatives – nitration, hydrogenation, separation and purification, start-up/shutdown philosophy.

Chemicals & specialty products

Process development, reaction and purification, lubricant and chemical blending, solvent recovery.

Used-oil re-refining

Dehydration, staged and wiped-film evaporation, high-vacuum distillation, solvent extraction, finishing.

Storage, terminals & bunkering

Tank farm systems, blending, loading/unloading, pumping, venting and vapour control.

Waste & environmental systems

Sludge and slop recovery, glycol recovery, soil treatment, wastewater and water reuse.

Project scope can include concept selection, FEED, detailed design inputs, engineering review, vendor coordination and execution-stage support.
Resource recovery · Environmental solutions

Recover value. Reduce waste.

Process solutions for industrial streams where separation, reuse and responsible treatment improve both operating performance and environmental outcomes.

Our treatment approach

1 · CharacteriseFeed variability, contaminants, lab and pilot data
2 · SeparatePractical treatment and recovery stages for the duty
3 · OptimiseYield, utilities, residues and water reuse
4 · ComplyDefined outlets and authority documentation

Used lubricating oil

Dehydration, vacuum separation, wiped-film evaporation, solvent extraction and finishing for base-oil quality.

Sludge & slop oil

Screening, heating, chemical treatment, decanting and centrifugation, with defined outlets for water and solids.

Glycol & solvent recovery

Contaminant removal, distillation and regeneration back to reusable specification.

Contaminated soil & solids

Thermal desorption and washing route evaluation, hydrocarbon recovery and residue handling.

Industrial wastewater

Oil–water separation, DAF, pH adjustment, solids removal and integration for reuse or discharge.

Environmental documentation

Process descriptions, emissions and waste stream data, BAT studies and regulatory submissions.

Process selection and performance depend on feed composition, testing, operating conditions and applicable discharge or product specifications.

Leadership

Experience you can draw on

Alef Process Solutions is led by a Chartered Chemical Engineer with a PhD and more than 20 years in process engineering and consultancy.

FK

Dr Firoz Khan

C.Eng | MIChemE | PhD Chemical Engineering

Consultancy and engineering roles in the UAE and UK covering process design, simulation, equipment design, feasibility studies, revamps, energy optimisation, process safety, project delivery and technical interface management.

Selected leadership experience

Oman

DUQM Refinery

Atmospheric and vacuum distillation design, heat integration and process deliverables.

Abu Dhabi, UAE

ADGAS

LNG process energy optimisation, flare and emissions reduction and pinch analysis.

Qatar

QAPCO

Ethylene plant revamp studies, equipment check-rating, process safety and start-up/shutdown philosophy.

USA

ExxonMobil

Reactor performance evaluation and design optimisation for refinery alkylation and catalyst systems.

Netherlands

Shell Global Solutions

Process design for fuel storage and handling systems across varying product properties.

Belgium

Total & other assignments

Refinery off-gas utilisation, equipment bottleneck studies and separation system design.

Selected professional experience of the company leadership in prior roles. Client names identify past assignments and do not imply current affiliation or endorsement.

Core competencies

Process designProcess simulationDistillationHeat integrationPinch analysisHAZOP / SILRelief & flareEquipment designCheck-ratingRevampsFeasibility studiesCommissioningWaste recoveryInterface managementTechnical due diligence
Project experience

Past projects

Oil refining, petrochemical manufacturing and hydrocarbon waste management projects across the GCC, Azerbaijan, Germany and Switzerland.

8UAE5Saudi Arabia1Switzerland1Azerbaijan15projects shown
Refineries and distillation

AMG Refinery

Sharjah, UAE

Largest privately owned refinery in Sharjah

Green Petrochem Industry

Sharjah, UAE

Petroleum oil distillation plant

AAB Kamca Energy

Sharjah, UAE

Petroleum oil distillation plant

Kapco Petroleum Industries

Sharjah, UAE

Petroleum oil distillation plant

SMA Petrochem

Sharjah, UAE

Petroleum distillation plant expansion

Emerald Refinery

Sharjah, UAE

Petroleum storage and refinery unit

Specialty and process units

Minerva Bunkering

Switzerland

Crude oil topping unit design

AMG Chemicals

Sharjah, UAE

Blending plant and specialty chemicals

Envirosol Industries

Sharjah, UAE

Diesel hydrotreating unit

Waste recovery and environmental

Al Majwal Group of Companies

Dammam, KSA

Petroleum waste recovery and recycling

Al Majwal Co. for Environmental Solutions

Jubail, KSA

Glycol recovery and waste management

ETHREE Energy

Abqaiq, Dammam, KSA

Petroleum waste processing facility

Manarah Shada Co. for Environmental Services

Jubail, KSA

Environmental services project

Sundance Azerbaijan LLC

Azerbaijan

Contaminated soil reclamation

Mobl Petroleum

Zulfi, KSA

Used lube oil recycling

Engagement and quality

Flexible engagement, consistent quality

We fit the way each client runs its projects – as a lump-sum study provider, an extension of an in-house team, or an independent reviewer.

Lump-sum studies

Defined scope, schedule and deliverables – feasibility, FEED, safety studies and process packages.

Call-off support

Rate-based process engineering for operators and EPCs with fluctuating workload.

Owner's engineer

Independent review of contractor, licensor and vendor designs on your behalf.

Site support

Commissioning, start-up, troubleshooting and performance testing at your facility.

How an assignment runs

1Enquiry

Understand objectives, data available and constraints

2Proposal

Scope, deliverables list, schedule and fee

3Kick-off

Design basis and assumptions agreed with the client

4Engineering

Deliverables issued for review with comment resolution

5Close-out

Final issue, handover and follow-on support

Our delivery standards

Capability matrix

Our services across the project lifecycle

A single view of where each Alef service supports your project – from the first concept study to life extension of an operating plant.

ServiceConceptFeasibilityFEEDDetailedProcureCommissionOperateLife ext.
Core serviceSupporting service

Sectors we serve

Refining & petroleum processing

Oil & gas processing

Petrochemicals & specialty chemicals

Storage terminals & utilities

Used-oil & waste recovery

Wastewater & environmental

Contact us

Let us discuss your project

Independent process engineering consultancy – from concept to commissioning and beyond. Tell us about your plant, study or revamp and we will respond promptly.

Please enter a valid contact number.